Mitsubishi Heavy Industries, Ltd. is one of the founders and leaders of the modern market of refrigeration equipment for home, office and industrial applications. The corporation produces everything that is related to this industry, from autonomous air conditioners to climate complexes for whole megacities united into a single network.
The operating mode and temperature are determined automatically using fuzzy logic. The frequency of the inverter changes accordingly.
Working in this mode, the air conditioner saves electricity, while the work remains quite efficient.
In any mode of operation, the optimum angle of the blinds is selected.
Automatic swing of the blinds to the right and left allows you to send refreshing air to one or another part of the room. You can stop the blinds at any desired angle.
Swinging blinds can be stopped at any angle. After restarting the blinds return to the stored position.
The use of 2 horizontal and 1 vertical vertical blind motor allows you to choose the most comfortable mode of operation.
When swinging the blinds can be adjusted to any angle from 0° to 90°.
This mode is convenient if you want to quickly reach the desired temperature. The air conditioner can operate in intensive mode without interruption for 15 minutes.
When working in this mode, the air conditioner will not only cool the air, but also effectively drain it on rainy days.
Tourmaline coating of the block elements generates negative ions 24 hours a day. When the air conditioner is on and off.
Effective air deodorization. To restore the functions, it is enough to wash the filter with water and dry it in the sun.
With the infrared remote control, whose buttons glow in the dark, you can easily manage all the functions of the air conditioner.
By setting the on / off timer for the air conditioner, you can set two timer operations per day. After installation, the timers will turn the system on and off at the right time each day.
The built-in intelligence function allows you to turn on the air conditioner for a while before the set one, so that at the set time the temperature will already reach the desired value. This mode is activated by the ON TIMER button (only for cooling and heating modes).
You can set the turn-off time of the air conditioner.
In this mode, there is an automatic selection between heating, cooling or drying.
In the event of malfunctioning of the air conditioner, the microcontroller controlling it automatically starts the self-diagnostic function. Inspection of the air conditioner and its repair must be carried out by authorized dealers.
In this mode, the frost is automatically removed from the air conditioner. It avoids unnecessary operation of the air conditioner in other modes.
When the power to the air conditioner is turned off, the automatic restart function saves the settings of the air conditioner that functioned just before the power was turned off, and after the power recovery it automatically resumes the system with the saved settings.
"Hot start" allows you to start work immediately, and a "hot spurt" accelerates heating, raising the set temperature by another 2 degrees. The third "hot" mode is the utilization of heat (HOT KEEP). It is used in automatic defrosting or in order to avoid getting cold air into the system.
The indoor air intake panel easily opens and closes. The panel closing the opening for the intake air is also removable.
The main unit has a backup switch. With it, you can turn the air conditioner on and off, if the remote control can not be used for any reason.
